Cyclocross & Gravel
categories
new products
LightCarbon New Gravel Fork - Made of Toray T700 carbon fiber - 12*100mm thru axle - Fit 700*45c max tire more
New LightCarbon Bottle Cages BC309 - Material: full carbon fiber - Finish: UD/3K, matt/gloss - Weight: 28±2g more
LightCarbon Most Affordable Carbon Gravel Wheels - Cyclocross/Gravel carbon wheel. - Built with LZX33 carbon rim designed specifically for CX/Gravel - LightCarbon OE private hub ceramic bearing. - Pillar 1423 spokes more
Mountain Bike 650B Asymmetry Design MTB Carbon Rims - Asymmetric design, help to equalize spoke tension. - Optimized bead seat angle design. - Ridus support design nipple bed. - Ultra smooth inner wall. more
LightCarbon New economy Carbon Gravel Wheels - Cyclocross/Gravel carbon wheel. - Built with LCX33 carbon rim designed specifically for CX/Gravel - LightCarbon OE private hub. - Pillar 1423 spokes more
LightCarbon New Carbon Foldable Electric Bike LCE-XO ·Super Light Carbon Fiber Frame ·Best Seat Post Battery Solution ·Quick-Release Front Wheel ·Invisible Cables ·Patented Hidden Folding Box more
All New Enduro Carbon Frame LCFS947 - New Enduro All-mountain bike frame - 185*55mm trunnion mount rear shock - Rear Travel 150~160mm - 12*148mm Boost thru axle more
- Shimano flat mount type disc brake
- Max tire clearance 700*53C or 650B*2.1''
- Full internal cable routing
- Front 12*100mm thru axle, rear 12*142mm thru axle
- 27.2mm seat post
item no.:
LCG071-Dproduct orgin:
Chinapayment:
Paypal, Bank transfer, West Unioncolor:
UD matt(customized painting acceptable)
Frame
LightCarbon 2021 New Gravel Frameset with Integrated Handlebar
Material
High modulus Toray T700 carbon fiber
Size
49, 52, 55, 58(cm)
Fork
Lightcarbon specify carbon fork
Headtube
Straight 1 1/2'' head tube(upper 52mm lower 52mm)
Weight
Frame 980+/-40g/fork 430+/-15g/seat post 190+/-10g/ Handlebar 360+/-15g (Size 52)
Seatpost
27.2mm*400mm (with 25mm offset)
Bottom bracket
Press-Fit BB86
Max tire clearance
700*53C or 650B*2.1''
Brake mount type
Shimano flat mount disc brake (disc brake bolts length 38.2mm)
Handlebar size
400/420/440mm
Stem size
90/100/110/120mm
Max Chainring
Max 53T- Small 39T
Dropout
Front 12*100mm TA Rear 12*142mm TA
Groupset
Mechanical and Di2 compatible (Not compatible with old rear derailleur without B-LINK, eg old 105 5800)
Test Standard
ISO4210
Warranty
2 years
Recommended Shimano Gravel Groupset GRX
LightCarbon gravel frameset geometry and size chart
| 490 | 520 | 550 | 580 | |
| SEATPOST INSERT LENGTH | 180mm | 220mm | 250mm | 270mm |
| REACH | 374.1mm | 377.5mm | 386mm | 397.1mm |
| TOP TUBE LENGTH, HORIZONTAL | 535mm | 550mm | 575mm | 595mm |
| STACK | 542.6mm | 563.4mm | 598.6mm | 627.1mm |
| WHEELBASE | 1008.9mm | 1014.5mm | 1029.6mm | 1049.8mm |
| CHAINSTAY LENGTH | 430mm | 430mm | 430mm | 430mm |
| FRONT CENTER | 593.8mm | 599.4mm | 614.5mm | 634.5mm |
| BB DROP | 70mm | 70mm | 70mm | 70mm |
| BB HEIGHT | 285mm | 285mm | 285mm | 285mm |
| SEAT TUBE ANGLE | 73.5° | 73° | 72.5° | 72.5° |
| HEAD TUBE ANGLE | 71° | 71.5° | 72° | 72° |
| SEAT TUBE LENGTH | 490mm | 520mm | 550mm | 580mm |
| HEAD TUBE LENGTH | 120mm | 140mm | 175mm | 205mm |
| BIKE STANDOVER HEIGHT(700C*53C) | 776.4mm | 793.4mm | 833.4mm | 863.9mm |
| BIKE STANDOVER HEIGHT(650B*2.1") | 766.4mm | 783.4mm | 823.4mm | 853.9mm |
| FORK RAKE/OFFSET | 50mm | 50mm | 50mm | 50mm |
| FORK LENGTH, FULL | 397mm | 397mm | 397mm | 397mm |
| TRAIL | 69.3mm | 66.1mm | 62.7mm | 62.7mm |
Gravel Frameset internal cable routing
A - Rear derailleur cable routing
B - Rear disc brake cable routing
C - Front Derailleur cable routing
D - Front disc brake cable routing
All cables were integrated though handlebar stem through head-tube, integrated design to make the whole complete bike clean and aerodynamic.
Technology we use on gravel frame production
Use the newest one-piece latex 3D mandrel and molding technology.
Even using the same material, the strength is improved 30%.
One-piece 3D latex mandrel helps to make smooth inner side of frame.
Our Gravel Frame cross-section
real photo of 3D latex mandrel
3D latex mandrel applied on frame
Such technology helps to optimize the orthodromic and strength of carbon fiber, and avoid wrinkle inside (wrinkle is a key factor that may cause crack)
Tradition method and 3D latex mandrel produce Products Compare
The above picture shows frame made with tradition technology and new 3D latex technology, for tradition method which is with many wrinkle and bubble inside. For 3D latex mandrel which is smooth inside, no wrinkle or bubble.
Special Design For the Top Tube
25mm offset seat post, providing better comfort ability for long distance cycling.
Top tube shaved off at the position near seat tube, which helps to reduce vibration and result in better comfort ability.
Special Design Gravel Handlebar for This Gravel Frame
In order to optimize the best riding experience for this gravel frameset, we have specified design the best gravel handlebar HBR08 for this model, it has 12 degree expand compare to the normal drop bars, it is more comfortable for rider to handle the bike on a long adventure journey.
LightCarbon gravel bike frameset overview
If you are also interested in gravel carbon wheelset, please click below picture to see detail in another page:
previous :
New Carbon Gravel Frameset with Integrated Stem Systemnext :
light carbon cyclocross frameset with disc brake bike frameWe will reply you within 24h after received your inquiry
- Shimano flat mount type disc brake - Max tire clearance 700*41C or 650B*1.9'' - Full internal cable routing - Front 12*100mm thru axle, rear 12*142mm thru axle - 27.2mm seat post
- Cyclocross Disc brake - Max tire clearance 700*38c - Full internal cable routing - Front 15*100mm thru axle, rear 12*142mm thru axle - 31.6mm seat post
- Shimano flat mount type disc brake - Max tire clearance 700*53C or 650B*2.1'' - Full internal cable routing - Front 12*100mm thru axle, rear 12*142mm thru axle - 27.2mm seat post
*255°C superhigh TG resin system. *Extremely stable brake surface. *Extremely low braking failure rate. *25mm wide U shape design. *Tubeless ready.
- Full internal cable routing - Made of Toray T700 carbon fiber - Aerodynamic shape integrated with stem -Carbon computer mount
- Aero and light weight carbon road rim for disc brake - High end DT Swiss 180S hubs, straight pull spoke system - Sram 12s XDR freehub. - High end Sapim CX-Ray spokes, light and aero
+86-592-6380131
email : info@lightcarbon.com
add : 2/F, NO.3 Bldg, Longtou Industrial Zone, NO.9 Xingmei Road, Xiamen, 361022, China
follow us :
newsletter
copyright © 2021 Lightcarbon Composite Technology Co.,Ltd.all rights reserved.
the professional team to service !
+86-592-6380131
info@lightcarbon.com
John.Liu | LightCarbon
